designed & dimensioned in millimeters[inches] this product manufactured with lead-free processing pb do not scale from this print 6.60 .260 6.10 .240 2.80 .110 recommended panel cutout 3.80[.150] max. panel thickness 2.5 .10 3.1 .12 10.2 .40 recommended cable stripping sma-nut-001-x sma-lwas-001-x sub-sma-j-c-x-st-sb3 fig.1 sma-j-c-x-st-sb3 shown sma-skt-004-x sma-j-c-x-st-bh3-cbdy sma-ins-016 sma-gkt-002 -st: straight orientation -sb3: sealed bulkhead (mh081 cable) termination plating specification -c: cable type -j: jack gender sma-j-c-x-st-sb3 -h: heavy gold (see notes 7 & 8) (sma-j-c-f-st-bh3-cbdy) (sma-ins-016) (sma-skt-004-h) (sub-sma-j-c-f-st-sb3) (sma-gkt-002) (sma-lwas-001-f) (sma-nut-001-f) c sheet of unless otherwise specified, dimensions are in millimeters [inches]. tolerances are: decimals angles .x: 0.3 [.01] 2 .xx: 0.13 [.005] .xxx: 0.051 [.0020] material: sma str jack s bulkhead, mh081- 50 ohm by: sma-j-c-x-st-sb3 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing r musser 04/05/2009 3 1 sheet scale: 1:0.333333 f:\dwg\misc\mktg\sma-j-c-x-st-sb3-mkt.slddrw notes: 1. represents a critical dimension. 2. center contact pushout force: 26.69 n [6 lb] min. 3. see sheet 3 for termination information. 4. components to be shipped unassembled. 5. sample orders: to be packaged in individual kit form, production orders: each component to be bulk packaged. 6. rohs compliant. 7. plating: -f: .000003" min gold over .000050" min nickel. -h: .000030" min gold over .000050" min nickel. 8. assembly plating designations: -h: (center contact)-h (outer contact) -f (remaining metal parts) -f shell,ferrule,nut,washer: brass contact: copper alloy dielectric: ptfe gasket: silicone 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 revision c
0.84 ref .033 10.05 ref .396 0.40 ref .016 1.27 ref .050 scale 8:1 10.15 .400 ref 6.50 .256 ref 0.50 .020 ref 8.00 .315 (hex) ref 9.24 .364 ref 12.60 .496 ref 15.60 ref .614 6.33 ref .249 1/4-36 uns-2a (ref) 5.86 ref .231 11.00 (hex) ref .433 12.70 ref .500 2.00 .079 ref 1/4-36 uns-2b ref 9.90 .390 ref 6.50 .256 ref 1.70 .067 ref 1.60 ref .063 scale 8:1 0.65 ref .026 0.50 .020 ref 4.00 .157 ref 0.75 .030 ref 3.27 ref .129 6.77 ref .267 sheet of sma str jack s bulkhead, mh081- 50 ohm by: sma-j-c-x-st-sb3 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing r musser 04/05/2009 3 2 sheet scale: 2:1 revision c f:\dwg\misc\mktg\sma-j-c-x-st-sb3-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
2.5 ref .10 3.1 ref .12 10.2 ref .40 mh-081 cable 7.0 2.5 .28 .10 hst-0.125-02-blk-a sma-ins-016 sma-j-c-x-st-bh3-cbdy sub-sma-j-c-x-st-sb3 0.6 max. gap allowable .02 sma-nut-001-x sma-lwas-001-x sma-gkt-002 0.10 max. gap allowable .004 sma-skt-004-x c add locking compound 0.05 ref .002 (to insulator) detail 'a' scale 8 : 1 reference plane c tip of contact to be flush with reference plane or recessed 0.10[.004] max. 0.84 .033 ref detail 'b' scale 8 : 1 19.10 0.10 .752 .004 solder shield apply heat shrink tubing add sub-sma-j-c-x-st-sb3 & tighten rear-threaded body to 10 in-lbs (use fixture as required to assure center contact socket location) solder signal socket and apply loctite 680 to threads add heat shrink tube, rear threaded body, and insulator strip and tin inner and outer conductor sheet of sma str jack s bulkhead, mh081- 50 ohm by: sma-j-c-x-st-sb3 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing r musser 04/05/2009 3 3 sheet scale: 1.5:1 revision c f:\dwg\misc\mktg\sma-j-c-x-st-sb3-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
